全自动造型机厂家

—专注水平造型机研发、生产!

全国24小时咨询热线: 13926238353

配置说明

造型机水口棒(浇注棒)

136006.jpg

(上图为两种款式的全自动造型机浇注棒)

铸造造型机专用水口棒,水平全自动造型机浇注棒,304不锈钢材质内置抗疲劳伸缩弹簧。安装于造型机上砂箱的压实板,可根据砂箱高度自由伸缩,在砂箱合箱射砂及压实前后与模具紧密接触,压实脱模后自动形成浇口或冒口。根据砂型内部型腔浇注系统的设计选择合适的浇注棒,通常为直径30mm或直径40mm两种规格作为浇注棒,常规伸缩范围在125cm - 240cm之间,其他规格长度则需另外定做。浇注棒也称水口棒,而冒口也是以同样的方式制作,一般直径为25mm或30mm。

Special nozzle rod for casting molding machine, pouring rod for horizontal automatic molding machine, 304 stainless steel, built-in anti fatigue telescopic spring. The compaction plate of the sand box installed on the molding machine can expand freely according to the height of the sand box. It is in close contact with the mold before and after sand shooting and compaction of the sand box. After compaction and demoulding, it will automatically form a gate or riser. According to the design of the pouring system inside the mold cavity of the sand mold, select the appropriate pouring rod, usually 30mm in diameter or 40mm in diameter. The conventional expansion range is 125cm - 240cm, and the length of other specifications needs to be customized. The pouring rod is also called nozzle rod, and the riser is also made in the same way, generally with a diameter of 25mm or 30mm.

136033_02.jpg

上图为后期改进的造型机浇注棒,采用三段式设计,伸缩更为灵活流畅,加宽了进水口的直径方便铁水的浇注及浇注后冷却过程中补缩,以及在日常使用中方便安装与拆卸。

The figure above shows the pouring rod of the later improved molding machine. It adopts the three-stage design, which makes the expansion more flexible and smooth, widens the diameter of the water inlet, facilitates the feeding of molten iron during pouring and cooling after pouring, and facilitates installation and disassembly in daily use




回到顶部

铸造造型机厂家 长按二维码添加微信好友

广东中铸机械有限公司
电话:13926238353
联系人:李经理
邮箱:470199755@qq.com
地址:广州市花都区迎宾大道123号
备案号:粤ICP备16050083号
中铸机械网址:https://www.zhongzhu1618.com