全自动造型机厂家

—专注水平造型机研发、生产!

全国24小时咨询热线: 13926238353

案例展示

山东聊城大型砂箱尺寸铸造造型生产线案例

13603_01.jpg


2019年10月份,山东聊城朗斯农牧于山东潍坊展会上与中铸机械正式达成合作签约,订购水平分型全自动造型机1450mm X 850mm一台搭配全自动造型生产线,以及550mm X 650mm常规全自动造型机一台搭配链板浇注线,用于养殖温床篦子铸造造型生产,同时响应环保政策要求实现绿色铸造发展,上图为客户与中铸机械正式签约以及造型机生产线调试完毕交付使用时所拍摄的图片记录。感谢刘总与谢总对中铸机械的信任与肯定。



In October 2019, Langsi agriculture and animal husbandry Co., Ltd. of Liaocheng, Shandong Province, officially signed a contract with zoomzu at the Weifang exhibition in Shandong Province, ordering a 1450mm x 850mm horizontal parting automatic molding machine with a fully automatic molding production line and 550mm X A 650mm conventional full-automatic molding machine is equipped with a chain plate casting line, which is used for casting and molding production of grate in breeding hotbed. At the same time, it responds to the requirements of environmental protection policies and realizes the development of green casting. The picture above shows the picture records taken when the customer formally signs a contract with zoomzu and the molding machine production line is completed and delivered for use. Thank Mr. Liu and Mr. Xie for their trust and affirmation of zoomzu.



最大的水平造型生产线以及最大的水平全自动造型机


砂箱尺寸规格1450mm X 850mm水平造型生产线以及造型主机装车发货的图片记录


Sand box size 1450mm x 850mm horizontal molding production line and molding machine loading and delivery photo record


水平全自动造型机用于生产铸铁篦子


1450mm X 850mm的砂箱一次完成两个铸件的造型,中间设置两个浇注水口,也是目前中国最大砂箱尺寸的水平全自动造型机。右图为铸造造型生产出来后的铸件产品图片。


The 1450 mm x 850mm sand box completes the molding of two castings at one time, and two pouring nozzles are set in the middle. It is also the horizontal automatic casting molding machine with the largest sand box size in China. The picture on the right is a picture of the casting product after casting molding.


砂型表面硬度测试


造型机调试完毕交付使用时的砂型表面硬度测试,紧实度为85左右

The surface hardness test of sand mold after commissioning and delivery of casting molding machine shows that the compactness is about 85


养殖温床篦子图片


养殖温床篦子配套造型主机的模具图片记录以及破碎出来后的铸件图片

The mold picture record and the broken casting picture of the main molding machine for the grate of breeding hotbed


铸造造型生产线图片


铸造生产车间550mm X 650mm砂型规格的铸造造型生产线,单主机配套两条双排双列链板浇注线

The foundry workshop is a 550mm x 650mm sand mold casting molding production line, and a single host is equipped with two double row and double row chain plate pouring lines


水平全自动造型生产线的图片


1435mm X 850mm的造型主机配备水平全自动造型生产线,造型生产后的砂型横截面较造大,为保证砂型的整体稳定性必须配备平整的台车工位进行转运输送,从而避免砂型裂箱等问题。


The 1435mm x 850mm main casting machine is equipped with a horizontal automatic molding production line. The cross section of the sand mold after molding production is large. In order to ensure the overall stability of the sand mold, it is necessary to equip a flat trolley station for transportation and transportation, so as to avoid sand mold box cracking and other problems.


黏土砂处理线的图片


混砂车间装配的40吨黏土砂处理线,为造型机及造型生产线的造型生产提供标准的机器用砂,也保证了铸造生产车间的环境卫生整洁。

The 40 ton clay sand processing line assembled in the sand mixing workshop provides standard machine sand for the molding machine and molding production line, and also ensures the environmental sanitation and tidiness of the foundry workshop.


回到顶部

铸造造型机厂家 长按二维码添加微信好友

广东中铸机械有限公司
电话:13926238353
联系人:李经理
邮箱:470199755@qq.com
地址:广州市花都区迎宾大道123号
备案号:粤ICP备16050083号
中铸机械网址:https://www.zhongzhu1618.com